UNC Taps and Dies
UNC Taps and dies
Description:
The abbreviation UNC stands for "Unified National Coarse", this is thread with a coarse pitch. We sell the manual taps and cutting plates per set but also per piece. The holders can be found on the "Holders for taps and dies" page.
UNC table:
| Size in inch | TPI | Bore diameter |
| 1/8 | 25 | 3,9mm |
| 3/16 | 24 | 4,6mm |
| 1/4 | 20 | 5,0mm |
| 5/16 | 18 | 6,6mm |
| 3/8 | 16 | 8,0mm |
| 7/16 | 14 | 9,3mm |
| 1/2 | 13 | 10,7mm |
| 9/16 | 12 | 12,2mm |
| 5/8 | 11 | 13,5mm |
| 3/4 | 10 | 16,5mm |
| 7/8 | 9 | 19,5mm |
| 1 | 8 | 22,2mm |
14 pcs UNC Hand tap set14 Piece UNC hand tap set
Description:
The set is suitable for cleaning and cutting threads on mild steel and nonferrous metals such as aluminium.∙ UNC Thread
∙ Taper and plug tap per size
∙ Manufactured from hardened and…€ 35,00
UNC Hand tap setUNC Hand tap set
Description:
The set is suitable for cleaning and cutting threads on mild steel and nonferrous metals such as aluminium.∙ UNC Thread
∙ Taper and plug tap per size
∙ Manufactured from hardened and tempered…€ 24,68
7 pcs UNC Hand die set7 Piece UNC hand die set
Description:
The set is suitable for cleaning and cutting threads on mild steel and nonferrous metals such as aluminium.∙ UNC Thread
∙ Manufactured from hardened and tempered carbon steel
∙ Tap…€ 32,50
UNC Hand diesUNC Hand dies
Description:
The set is suitable for cleaning and cutting threads on mild steel and nonferrous metals such as aluminium.∙ UNC Thread
∙ Manufactured from hardened and tempered carbon steel
∙ Tap size: no.…€ 24,68
